Converting a Camshaft Engine to a Camless Engine

  • In a pushrod engine, remove lifters, pushrods, rocker arms, springs and valves from the head. Leave ineffective camshaft in place for the distributor timing and function. Seal off oil passages in head, machine head and valves to fit new camless valve actuators. Install amplifiers, install Geer Technologies new distributor which houses and turns a disk platter integral the distributor units' shaft. The disk will provide the signals as previously described.

  • IF you have a 350 HP and 350 FT LBS TQ engine and then converted it to a camless engine, you may achieve up to 420 HP and 420 FT LBS TQ with 20% better gas mileage and 20% less emissions!